|
FillStyle macro command |
  
|
|
FillStyle macro command |
|
Macro commands may be used either in macros or by sending the commands to DPlot via dynamic data exchange (DDE). Some commands are valid only in macros (noted by Macros Only). Commands sent to DPlot via DDE must be enclosed by square brackets [ ]. Macro commands should not include the brackets.
Command parameters shown in the descriptions below are placeholders for the actual values. Command parameters are either numeric values, equations that evaluate to numbers, or character strings. Character string parameters are always bound by double quotation marks. Equations must be preceded by an equals sign (=).
The pipe symbol (|) in the command syntax indicates that a parameter is optional, and should not be included in your macro unless otherwise noted.
All indices into arrays are 1-based, e.g. Curve1=1 refers to the first curve in a plot.
A 0x prefix for numbers in the descriptions below indicates hexadecimal notation; e.g. 0x0010 = 16.
JR/Viewer indicates that the command is supported by DPlot Jr or DPlot Viewer.
JR/Viewer indicates that the command is NOT supported by DPlot Jr or DPlot Viewer.
[FillStyle(Curve,Style)] |
|
Sets the pattern used to fill the interior of bar charts in data set Curve. Style should be one of:
| 0 | Hollow |
| 1 | Solid |
| 2 | Horizontal lines |
| 3 | Vertical lines |
| 4 | 45-degree lines, sloping down from left-to-right |
| 5 | 45-degree lines, sloping up from left-to-right |
| 6 | Horizontal-vertical crosshatch |
| 7 | 45-degree crosshatch |
____________________________
See also
BarChartStyle macro command
Page url:
https://www.dplot.com/help/index.htm?fillstylecommand.htm